ASME SA213 TP304 Stainless Steel Tube




Stainless Steel 304 Tubes Manufacturer, SS 304 Seamless Tube Supplier

ASTM A213 TP304 Stainless Steel Tube Specification

Specification
ASTM A-213 & Its equivalent ASME, DIN & EN Standard.
Grades
304, 304L, 304H, 304LN, 309S, 310S, 316, 316L, 316H, 316Ti, 317, 317L, 321, 321H, 347, 347H, 410,446
Type
Seamless Ferritic and Austenitic Boiler, Superheater, and Heat-Exchanger Tubes
Outer Diameter Size
1/4” OD, NB to 3” OD, NB sizes
Thickness
1mm to 12mm, SCH 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S as per ANSI B36.19/36.10
Length
Up to 6 meters, custom cut lengths
Ends
No.1 Pickled Finish, No.4 finish, BA Finish, Electropolished Seamless Tubes
Delivery Conditions
As Rolled, Formed, Stress Relieved, Annealed, Hardened, Tempered, Cold Draw
Coating
Electropolish, Mechanical Polish, Satin Finish, Passivated
Other Testing
Product Analysis, Transverse Tension Test, Flattening Test, Etching Test, Radiographic Examination, Stabilizing Heat Treatment, Intergranular Corrosion Test, Weld Decay Test, Magnetic Particle Detection, Grain Size Test, NACE 0175, Dual Grade, PWHT (POST WELD HEAT TREATMENT), Flare Test, Bend Test, Hardness Test, Tensile Test etc
Dimension
All Pipes & Tube Is Manufactured and Inspected / Tested to the Relevant standards including ASTM and ASME
Value Added Services
Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Packaging
Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Material Test Certificate
Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC
Delivery
By Road – Truck / Train, By Sea – Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 30 Feet Container / 35 Feet Container / High Cube Container / Open Top Container, By Air – Freighter Civil Passenger and Cargo Planes

ASTM A213 TP304 Equivalent

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304

ASTM A213 TP304 Tubing Sizes

Size 
OD, Inches
BW 
Ga.
Wall 
Dec-In.
ID
Weight 
Lbs/Ft.
1/8
22
0.028
0.069
0.0290
20
0.035
0.055
0.0336
3/16
22
0.028
0.131
0.0478
1/4
25
0.020
0.210
0.0491
22
0.028
0.194
0.0664
21
0.032
0.187
0.0745
20
0.035
0.180
0.0804
18
0.049
0.152
0.1052
16
0.065
0.120
0.1284
5/16
20
0.035
0.242
0.1039
18
0.049
0.214
0.1382
16
0.065
0.182
0.1722
3/8
22
0.028
0.319
0.1038
20
0.035
0.305
0.1271
18
0.049
0.277
0.1706
16
0.065
0.245
0.2152
7/16
18
0.049
0.340
0.2036
1/2
25
0.020
0.460
0.1025
20
0.035
0.430
0.1738
18
0.049
0.402
0.2360
16
0.065
0.370
0.3020
5/8
20
0.035
0.555
0.2205
18
0.049
0.527
0.3014
16
0.065
0.495
0.3888
3/4
20
0.035
0.680
0.2673
18
0.049
0.652
0.3668
16
0.065
0.620
0.4755
14
0.083
0.584
0.5913
7/8
18
0.049
0.777
0.4323
16
0.065
0.745
0.5623
11
0.120
0.635
0.9676
1
20
0.035
0.930
0.3607
18
0.049
0.902
0.4977
16
0.065
0.870
0.6491
14
0.083
0.834
0.8129
11
0.120
0.760
1.1278
1-1/4
11
0.120
1.010
1.4480

Chemical Composition Of ASTM A213 TP304 Tubes

Grade C Mn Si P S Cr Mo Ni N
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0   10.5 0.10

ASTM A213 TP304 Tubes Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201

ASTM A213 TP304 SS Tubes Physical Properties


Grade
Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (μm/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity (nΩ.m)
0-100°C 0-315°C 0-538°C at 100°C at 500°C
304 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Specification Tolerance For ASTM A213 TP304 Tubes

Specification Allowable Outside Diameter Variation in mm Allowable Wall Thickness Variation Exact Length Tolerance in mm Testing
Nominal Diameter Over Under %Over %Under Over Under
ASTM-A213 TP304
Seamless Boiler
Superheater and 
Heat Exchanger Tubes
Under 25.4 .1016 .1016 +20 -0 3.175 0 Flattening Test
25.4-38.1 incl .1524 .1524 +22 -0 3.175 0 Tension Test
38.1-50.8 excl .2032 .2032 +22 -0 3.176 0 Flare Test
50.8-63.5 excl .254 .254 +2 -0 4.46 0 Hardness Test
63.5-76.2 excl .3048 .3048 +22 -0 4.76 0 100% Hydrostatic test
76.2-101.6 incl .381 .381 +22 -0 4.76 0 Refer to ASTM A-450
Top