ASTM B161 Tubing supplier, ASTM B161 UNS N02200

ASTM B161 specification covers the standard requirements for nickel (UNS N02200) and low-carbon nickel (UNS N02201) in the form of cold-worked seamless pipe and tube. ASTM B161 material shall conform to the specified
chemical composition limits for nickel, copper, iron, manganese, carbon, silicon, and sulfur which shall be determined by chemical analysis. ASTM B161 specification covers nickel (UNS N02200)3 and low-carbon
nickel (UNS N02201)3 in the form of cold-worked seamless pipe and tube.ASME SB 161 Nickel 200 Seamless Tubes has netter overall corrosion resistance in oxidizing corrosives.
ASTM B161 UNS N02201 Seamless Pipes has outstanding resistance to localized corrosion and excellent resistance to stress corrosion cracking. ASTM B161 Pipes and Tubes, which possesses outstanding
resistance to non – oxidizing acids, such as hydrochloric acid and sulphuric acid. The recently developed our ASTM B161 UNS N02200 Seamless Pipes will handle stronger non – oxidizing acids than other type of
alloys and will tolerate oxidizing impurities that B-type alloys will not. If these ASME SB 161 Tubes undergoes greater than 15 % deformation during cold working, then a solution anneal may be necessary. We
use a range of transport partners to ship overnight within foreign countries, and offer a full range of logistics solutions for our ASTM B161 Seamless Tubing from priority express services to more cost – effective
economy shipments all around the globe.The advantages of these ASME SB 161 Seamless Tubes over previous family of alloys are enhanced thermal stability and improved fabrication characteristics. Brushing with
our ASME SB161 Seamless Pipes after welding will remove the heat tint and produce a surface area that does not require additional pickling. For optimum corrosion resistance, forged parts of these ASME SB 161 Seamless Tubes should be subsequently annealed.
ASTM B161 Seamless Pipes and Tubes Specifications
Size |
1/2" – 10" / 4 to 219mm W. T.: 0.5 to 20mm |
Thickness |
1mm to 20mm |
Length |
Within 13500mm |
Type |
Seamless Pipes, Seamless Tubes |
Grades |
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Nickel 205 (UNS N02205). |
Specialized in |
ASTM B161 UNS N02200, ASTM B161 UNS N02201, Nickel 200 Seamless Pipe, Nickel 201 Seamless Pipe, Nickel 200 Seamless Tube, Nickel 201 Seamless Tube, ASTM B161 Seamless Nickel Alloy Tube, ASTM B161 UNS N02200 Nickel
200 Pipe, ASTM B161 NI 201 Alloy Pipe |
ASTM B161 Pipe and Tube Test Certificates
- EN 10204/3.1B,
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report, etc.
ASTM B161 Plate Value Added Services
- Mechanical Testing Such as Tensile of Area
- Hardness Test
- Chemical Analysis – Spectro Analysis
- Positive Material Identification – PMI Testing
- Flattening Test
- Micro and MacroTest
- Pitting Resistance Test
- Flaring Test
- Intergranular Corrosion (IGC) Test
ASTM B161 UNS N02200 Chemical Composition
Nickel 200 |
Ni |
C |
Mo |
Mn |
Si |
Fe |
P |
S |
Cu |
Cr |
99.0 min |
0.15 max |
– |
0.35 max |
0.1 max |
0.4 max |
– |
0.01 max |
0.25 max |
– |
ASTM B161 UNS N02200 Mechanical Properties
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
8.9 g/cm3 |
1446 °C (2635 °F) |
Psi – 21500 , MPa – 148 |
Psi – 67000 , MPa – 462 |
45 % |
ASTM B161 UNS N02200 Equivalent
STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
EN |
JIS |
BS |
GOST |
Nickel 200 |
N02200 |
2.4066 |
N-100M |
Ni 99.2 |
NW 2200 |
NA 11 |
НП-2 |
Table of Content