ASTM B444 Tubing, ASTM B444 Tube, ASTM B444 Pipe Supplier

ASTM B444 specification covers UNS N06625 and UNS N06852 nickel-chromium-molybdenum-columbium alloys and UNS N06219 nickel-chromium-molybdenum-silicon alloy in the form of cold-worked seamless pipe and tube. UNS N06625 products are furnished in annealed Grade 1 and solution annealed Grade 2 while UNS N06219 and UNS N06852 are in solution annealed condition only. ASTM B444 Grade 1 (annealed) Material is normally employed in service temperatures
up to 1100°F (593°C). ASTM B444 Grade 2 (solution annealed) Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required. ASTM B444 UNS N06219 and ASTM B444 UNS
N06852 are supplied in the solution annealed condition only.
ASTM B444 Seamless Pipes and Tubes Specifications
Size |
6.00 mm OD up to 914.4 mm OD |
Thickness |
0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS |
Length |
Within 13500mm |
Type |
Seamless Pipes, Seamless Tubes |
Grades |
UNS N06625, N06852, and N06219 |
ASTM B444 Chemical Composition
Grade |
C |
Mn |
Si |
S |
Cu |
Fe |
Ni |
Cr |
ASTM B 444 UNS N06625 |
0.10max |
0.50 max |
0.50 max |
0.015max |
– |
5.0 max |
58.0 min |
20.0 – 23.0 |
ASTM B444 Mechanical Properties
Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
ASTM B444 UNS N06625 |
8.4 g/cm3 |
1350 °C (2460 °F) |
Psi – 1,35,000 , MPa – 930 |
Psi – 75,000 , MPa – 517 |
42.5 % |
ASTM B444 Pipe and Tube Test Certificates
- EN 10204/3.1B,
- Raw Materials Certificate
- 100% Radiography Test Report
- Third Party Inspection Report, etc.
Table of Content