Duplex 2205 Plate




Duplex UNS S31803 Duplex Steel Plates Supplier, SAF 2205 Plate Exporter

Duplex 2205 Plate Supplier

Duplex 2205 Plate made by a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. Duplex Steel 2205 Plates have a two-phase microstructure consisting of grains of ferritic and austenitic stainless steel.Duplex SAF 2205 Plate have the strength of ferritic (400 stainless steel series) while retaining the corrosion resistance of the austenitic (300 stainless steel series).Our offered Duplex UNS S31803 Plate made from cold formed stainless steel have a smooth finish and strong mechanical traits, as well as closer tolerances than hot formed coil-based welded Plate.Duplex DIN 1.4462 Plates have excellent resistance to stress corrosion cracking, crevice, pitting, erosion and general corrosion in severe environments. We have a huge inventory of UNS S31803 Duplex Steel Plates and UNS S32205 Plates in different sizes and dimensions as per customer requirement. Our offered Duplex Steel UNS S31803 Plate and Duplex Steel UNS S32205 Plate are widely used in a range of applications like structural, mechanical and general engineering purposes.

2205 Duplex Steel Plate Specifications

Sizes 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
ASTM ASTM B168
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Material JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc
DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc
ASTM Standard ASTM A162, GB/T2054, DIN177502002, ASTM B127,ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
Why choose Superior Steel Overseas
  • EN 10204/3.1B,
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
  • High special strength, high melt point
  • Excellent corrosive resistance,good thermal resistance
  • Customer support after-sales service
  • Huge Stock, Timely delivery
  • Strict Control from Raw Material to Finished Inconel 600 Plate
  • Free Quote, Inquiry answered within 24 hours
Inconel 600 profiling To provide a full profiling service we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting

Duplex 2205 Plate Chemical Composition

Grade   C Mn Si P S Cr Mo Ni N
2205 (UNS S31803) Min Max – 0.030 – 2.00 – 1.00 – 0.030 – 0.020 21.0 23.0 2.5 3.5 4.5 6.5 0.08 0.20
2205 (UNS S32205) Min Max – 0.030 – 2.00 – 1.00 – 0.030 – 0.020 22.0 23.0 3.0 3.5 4.5 6.5 0.14 0.20

Duplex 2205 Plate Mechanical Properties

Grade Tensile Strength
(MPa) min
Yield Strength
0.2% Proof
(MPa) min
Elongation
(% in 50mm) min
Hardness
Rockwell C (HR C) Brinell (HB)
UNS S31803 / 2205 621 448 25 31 max 293 max
UNS S32205 / 2205 621 448 25 31 max 293 max

Duplex 2205 Plate Equivalent grades

Grade UNS
No
Old British Euronorm Swedish SS Japanese JIS
BS En No Name
2205 S31803 / S32205 318S13 1.4462 X2CrNiMoN22-5-3 2377 SUS 329J3L

2205 Duplex Steel Plate Sizes

Thickness (mm) Length x width (mm) Length x width (mm) Length x width (mm)
5 12000 x 2000 12000 x 2500 12000 x 3000
6 12000 x 2000 12000 x 2500 12000 x 3000
8 12000 x 2000 12000 x 2500 12000 x 3000
10 12000 x 2000 12000 x 2500 12000 x 3000
12.5 12000 x 2000 12000 x 2500 12000 x 3000
15 12000 x 2000 12000 x 2500 12000 x 3000
16 12000 x 2000 12000 x 2500 12000 x 3000
20 12000 x 2000 12000 x 2500 12000 x 3000
25 12000 x 2000 12000 x 2500 12000 x 3000
30 12000 x 2000 12000 x 2500 12000 x 3000
35 12000 x 2000 12000 x 2500 12000 x 3000
40 12000 x 2000 12000 x 2500 12000 x 3000
45 12000 x 2000 12000 x 2500 12000 x 3000
50 12000 x 2000 12000 x 2500 12000 x 3000

Duplex UNS S31803 Plate Tolerances

Gauge LB/Sq. Ft. LB/Sq In. Gauge Tolerance
72″ Wide 96″ Wide
3/16 0.1875 8.579 0.05958 +.045″ -.010″ +.050″ -.010″
7/32 0.2187 9.870 0.06854
1/4 0.2500 11.162 0.07750
5/16 0.3125 13.746 0.09546
3/8 0.3750 16.496 0.11456 +.055″ -.010″ +.060″ -.010″
7/16 0.4375 19.080 0.13250
1/2 0.5000 21.633 0.15044
9/16 0.5625 24.247 0.16838
5/8 0.6250 26.831 0.18633
11/16 0.6875 29.415 0.20427
3/4 0.7500 32.123 0.22308 +.060″ -.010″ +.065″ -.010″
13/16 0.8125 34.707 0.24102
7/8 0.8750 37.291 0.25897
15/16 0.9375 39.875 0.27691
1 1.0000 42.665 0.29628 +.070″ -.010″ +.075 -.010″
1-1/8 1.1250 47.833 0.33217
1-1/4 1.2500 53.001 0.36806
1-3/8 1.3750 58.169 0.40395
1-1/2 1.5000 63.337 0.43984
1-3/4 1.7500 73.672 0.51161
2 2.0000 84.008 0.58339 +.125″ -.010″ +.150″ -.010″
2-1/8 2.1250 89.610 0.62229
2-1/4 2.2500 94.777 0.65817
2-1/2 2.5000 105.113 0.72995
2-3/4 2.7500 115.449 0.80173
3 3.0000 126.301 0.87709 +.150″ -.010″ +.160″ -.010″
3-1/2 3.5000 146.972 1.02064
4 4.0000 168.264 1.16850 +.180″ -.010″ +.200″ -.010

2205 Duplex Stainless Steel Plate Dimensions

Surface finish

Thickness (mm)

Width (mm)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

max. 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

max. 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

max. 2032

2R – Cold rolled, bright annealed

0.25–3.5

max. 1524

2H – Work hardened

0.4–6.35

max. 1524

Polished, brushed

0.5–4.0

max. 1524

Top