Inconel 600 Pipe Stockist, Inconel 600 Welded Pipe distributor

Inconel 600 Pipe is a nickel-chromium alloy with good oxidation resistance to 2000 degree F. Inconel Alloy 600 Pipe has good strength and resistance to general corrosion in a variety of elements and Resists stress-corrosion
cracking.Our offered Inconel 600 Seamless Pipe orInconel 600 Welded pipe commonly used for thermocouple, furnace muffles, heat exchangers, food processing.Alloy 600 Pipe stock size range is OD:.125″ – 4″and schedule Sch10 –
Sch80.Our ability to provide Inconel Alloy 600 Seamless Pipe on a project basis is one of our strongest capabilities and is unmatched in our industry.We are able to provide Inconel Alloy 600 pipes of all sizes
and compositions. Some sizes and compositions that are standardized (e.g. by ASTM, AMS and BS) are already in stock in our storages around the world.Our in-stock selection of Inconel 600 piping products covers a wide range
of alloys, sizes and forms. Inconel 600 Round Pipes extensive use in the energy and nuclear power markets
Inconel 600 Pipe Specifications
Specifications |
ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517 |
size |
4 to 219mm W. T.: 0.5 to 20mm |
size |
5.0 mm – 1219.2 mm |
size |
5.0 mm – 1219.2 mm |
Specialized in |
Large Diameter Size |
Schedule |
SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
Finish |
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Form |
Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. |
Length |
Single Random, Double Random & Cut Length. |
End |
Plain End, Beveled End, Treaded. |
Marking |
Marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Material Test Certificates (MTC) |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
We can also cut, thread, and groove Inconel 600 Pipes to meet your specifications. |
Inconel Alloy 600 Pipe Chemical Composition
Grade |
C |
Mn |
Si |
Fe |
S |
Cr |
Cu |
Ni |
Inconel 600 Pipe |
min. |
– |
– |
– |
6.0 |
– |
14.0 |
– |
72.0 |
max. |
0.15 |
1.0 |
0.5 |
10.0 |
0.015 |
17.0 |
0.5 |
– |
Inconel 600 Pipe Mechanical Properties
Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
Rockwell B (HR B) max |
Brinell (HB) max |
Inconel 600 Pipe |
Psi – 95,000 , MPa -655 |
Psi – 45,000 , MPa – 310 |
40 |
– |
– |
Equivalent Grades for Inconel 600 Seamless Pipes
Grade |
UNS No |
Old British |
Euronorm |
GOST |
Japanese JIS |
BS |
En |
No |
AFNOR |
Inconel 600 Pipe |
N06600 |
NA 13 |
NiCr15Fe |
2.4816 |
NC15FE11M |
МНЖМц 28-2,5-1,5 |
NCF 600 |
Inconel 600 Pipe Pressure Rating
Grade |
Maximum internal pressure, ksi
|
|
100°F |
200°F |
300°F |
400°F |
500°F |
600°F |
700°F |
Comments |
N06600 :1 |
8.02 |
8.02 |
8.02 |
8.02 |
8.02 |
8.02 |
8.02 |
B167 OD>5" and hotworked |
N06600 :2 |
9.6 |
9.6 |
9.6 |
9.6 |
9.6 |
9.6 |
9.6 |
B167 OD<=5" and hotworked + OD>5" and coldworked |
N06600 :3 |
11.19 |
11.19 |
11.19 |
11.19 |
11.19 |
11.19 |
11.19 |
B167 OD<=5" and coldworked |
Table of Content