Inconel Alloy 600 Plate




Inconel Alloy 600 Plate Stockist, Inconel 600 Sheet, Inconel 600 Coil Suppliers

Inconel 600 Plate Supplier

Inconel 600 Plates made by a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 2000°F (1093°C). We stocks Alloy 600 nickel alloy plate in thicknesses from 3/16″ (4.8mm) through 2″ (50.8mm) for applications in chemical and food processing equipment, paper mills, heat exchangers, and heat treating mufflers and retorts. Inconel 600 Sheets is non-magnetic and readily weldable. Nickel Alloy 600 Plate is used in a variety of corrosion resisting applications. Inconel 600 Coils has been used in a variety of applications. 600 Inconel Plate contains high nickel content of the material provides exceptional resistance to chloride stress corrosion cracking. Inconel 600 Strips is well suited for applications requiring carburization resistance or in sulfur containing environments at moderate temperatures. However, it is subject to sulfidation at high temperatures. Inconel 600 Plate specification governs a group of general requirements associated with plate, sheet, coil and strip. Buy Inconel 600 Plates at best price in India.

Inconel 600 Plate Specifications

Specification ASTM B168 UNS N06600, ASME SB168
Sizes 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
ASTM ASTM B168
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Material JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc
DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc
ASTM Standard ASTM A162, GB/T2054, DIN177502002, ASTM B127,ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
Why choose Superior Steel Overseas
  • EN 10204/3.1B,
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
  • High special strength, high melt point
  • Excellent corrosive resistance,good thermal resistance
  • Customer support after-sales service
  • Huge Stock, Timely delivery
  • Strict Control from Raw Material to Finished Inconel 600 Plate
  • Free Quote, Inquiry answered within 24 hours
Inconel 600 profiling To provide a full profiling service we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting

Chemical Composition Of Inconel 600 Plates

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Inconel 600 Plates Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95000 , MPa – 655 Psi – 45000 , MPa – 310 40%

Inconel 600 Plate Physical Properties

Element Density Melting Point Specific Heat Magnetic Permeability (75°F, 200 oersted):
Inconel 600 0.306 (m g/m3) 2470-2575°F 0.106 Btu/lb x °F (444 J/kg-°C) 1.010

Inconel 600 Sheets Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Inconel 600 Plate Dimensions

Inconel 600 Plate Metric Dimensions
Surface finish Thickness (mm) Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524
Top