Inconel X750 Tube




Inconel Alloy X750 Seamless Tubing Suppliers, Nickel Alloy X750 Tube

Inconel X750 Tube Suppliers

 Inconel X750 Tube  (UNS N07750) made by  nickel-chromium-iron precipitation-hardening alloy. Alloy X750 Tubing have good creep and oxidation resistance, and are formed in different shapes. Inconel X750 Tubing can be strengthened by solid-solution hardening, work hardening, and precipitation hardening.Inconel X750 Pipe are classified into three groups such as cobalt-based, nickel-based, and iron-based alloys.Inconel X750 Seamless Tube and Inconel X750 Welded Tube have the ability to function under high temperatures and severe mechanical stress, and also where high surface stability is required.The properties of  Nickel Alloy X750 Tube are similar to Alloy 718 Tube however alloy X750 is more readily fabricated. 

Superior Steel Overseas is worldwide Supplier of Inconel X750 Tube & now we became distrubutor of Inconel X750 Seamless Tube & Inconel X750 Welded Tube. We are India's largest Stockiest of Nickel X750 Tubing with huge inventory of Nicrofer 5219 Tube, Superimphy X750 Tube, Haynes X750 Tube, Pyromet X750 Tube, Supermet X750 Tube. and Udimet X750 Tube. In our ready stock you can find Inconel X750 Heat-resistant capillary Tubes, Inconel X750 precision tubes, Inconel X750 Hydraulic tubes, Inconel X750 Instrumentation Tubes, Inconel X750 cannula tubes, Inconel X750 pyrometer tubes, Inconel X750 protective tubes / protection tubes and Inconel X750 Sighting tubes in different diameter & wall thickness..We have over 19 years of experience in steel trading with companies in 30 countries around the world and acts as a one stop industrial service company make us leading supplier and  exporter of Inconel X750 Tube in india.

Inconel X750 Tubing Specifications

Size : 15 NB to 150 NB IN

Type : Seamless / ERW / Welded / Fabricated / Hollow / LSAW Pipes

wall thickness: .035" –.095′, (special wall thicknesses available)

Schedule : SCH5, SCH10, SCH40, STD, SCH80, SCH160

Finish : Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF

Form : Round, Square, Rectangular, Hydraulic, Straight or ‘U’ bent Tubes Etc.

Length : Single Random, Double Random & Cut Length.

End : Plain End, Beveled End, Treaded

Marking: All s are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)

Inconel Alloy x750 Tube Chemical Composition

% NI CR C MN CU SI S FE
Min 70 14 5
Max 17 0.08 1 0.50 0.50 0.01 9

Inconel x750 Tubing Mechanical Properties

MECHANICAL & PHYSICAL PROPERTIES 20°C 200°C 400°C 427°C 538°C 600°C 649°C 732°C 816°C
Ultimate Tensile Strength /MPa 1503.1 1351.4 744.6 688.8 622.6 593 600
0.2% Yield Strength /MPa 979.1 737.7 365.4 340.6 278.5 250.3 253.7
Elongation % 36 49 47 47 46 47 48
Charpy Impact V-notch /J 436.6 115.2 189.8
Coefficient of Thermal Expansion µm/m⁰C 14.22 14.94 15.12 15.48 15.66 15.84
Thermal Conductivity /kcal/(hr.m.°C) 10 11.2 12.1 12.9 15 15.66 15.84
Modulus of Elasticity / x105 MPa 1.95 1.89 1.8 1.71 1.61

Alloy x750 Tube Physical Properties

Density: 8.276 g/cm³
Melting range: 1393-1427°C
Poisson’s ratio: 0.3
Electrical resistivity: 1.22 x 10-6 Ω⋅m
Corrosion resistance: PREN (PREN = %Cr + 3.3x%Mo + 16x%N) 44

Equivalent Grades for Inconel x750 Seamless and Welded Tubes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel X-750 2.4669 N07750          

Alloy X750 Tubing Pressure Rating

Tube O.D.
(in.)
Wall Thickness of Tube (inches)
.028 .035 .049 .065 .083 .095 .109 .120
Working Pressure (psig)
1/8 7900 10100            
1/4 3700 4800 7000 9500        
5/16   3700 5400 7300        
3/8   3100 4400 6100        
1/2   2300 3200 4400        
3/4     2200 3000 4000 4600    
1       2200 2900 3400 3900 4300
Top