Nickel 201 Pipe Stockist, Nickel 201 Welded Pipe distributor

The chemistry of Nickel 201 Pipe is identical to Nickel 200 except for the carbon content. Nickel Alloy 201 Pipe contains limits carbon content to 0.02%.Our offered Nickel 201 Seamless Pipe or Nickel 201 Welded
pipe available in Size ranges 1/8" up to 26". Alloy 201 Pipe is a more acceptable material in the same type of environments when temperatures are above 600 degrees F.Our ability to provide Nickel Alloy 201
Seamless Pipe on a project basis is one of our strongest capabilities and is unmatched in our industry.We are able to provide Nickel Alloy 201 pipes of all sizes and compositions. Some sizes and compositions
that are standardized (e.g. by ASTM, AMS and BS) are already in stock in our storages around the world.Our in-stock selection of Nickel 201 piping products covers a wide range of alloys, sizes and forms. Nickel 201 Round Pipes extensive use in the energy and nuclear power markets
Nickel 201 Pipe Specifications
| Specifications |
ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517 |
| size |
4 to 219mm W. T.: 0.5 to 20mm |
| size |
5.0 mm – 1219.2 mm |
| size |
5.0 mm – 1219.2 mm |
| Specialized in |
Large Diameter Size |
| Schedule |
SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
| Finish |
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Form |
Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. |
| Length |
Single Random, Double Random & Cut Length. |
| End |
Plain End, Beveled End, Treaded. |
| Marking |
Marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Material Test Certificates (MTC) |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
| We can also cut, thread, and groove Inconel 600 Pipes to meet your specifications. |
201 Nickel Alloy Pipes Chemical Composition
| Nickel 201 |
Ni |
C |
Mo |
Mn |
Si |
Fe |
P |
S |
Cu |
Cr |
| Balance |
0.15 max |
– |
0.35 max |
0.35 max |
0.40 max |
– |
0.01 max |
0.25 max |
– |
Nickel Alloy 201 Pipe Mechanical Properties
| Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
| 8.9 g/cm3 |
1446 °C (2635 °F) |
Psi – 21500 , MPa – 148 |
Psi – 67000 , MPa – 462 |
45 % |
Equivalent Grades for 201 Nickel Pipe
| STANDARD |
UNS |
WERKSTOFF NR. |
AFNOR |
EN |
JIS |
BS |
GOST |
| Nickel 201 |
N02201 |
2.4068 |
– |
LC-Ni 99 |
NW 2201 |
NA 12 |
НП-2 |
Nickel 201 Pipe Pressure Rating
Nickel 201 Pipe O.D. (in.)
|
Wall Thickness of Pipe (inches) |
| .028 |
.035 |
.049 |
.065 |
.083 |
.095 |
.109 |
.120 |
| Working Pressure (psig) |
| Nickel 201 Pipe 1/8 |
7900 |
10100 |
|
|
|
|
|
|
| Nickel 201 Pipe 1/4 |
3700 |
4800 |
7000 |
9500 |
|
|
|
|
| Nickel 201 Pipe 5/16 |
|
3700 |
5400 |
7300 |
|
|
|
|
| Nickel 201 Pipe 3/8 |
|
3100 |
4400 |
6100 |
|
|
|
|
| Nickel 201 Pipe 1/2 |
|
2300 |
3201 |
4400 |
|
|
|
|
| Nickel 201 Pipe 3/4 |
|
|
2201 |
3000 |
4000 |
4600 |
|
|
| Nickel 201 Pipe 1 |
|
|
|
2201 |
2900 |
3400 |
3900 |
4300 |
Types of Nickel 201 Pipe
- Nickel 201 Hollow Pipe
- Nickel 201 Seamless Pipe
- Nickel 201 Bush Hex Pipe
- Nickel 201 Round Pipe
- Nickel Alloy 201 Round Pipe
- Custom Nickel Alloy 201
- Nickel Alloy 201 Custom Pipe
- Nickel 201 Thick Wall Pipe
- Nickel 201 Thick Wall Pipe
- SCH40 Nickel 201 pipe
- Nickel 201 Flex pipe
- Nickel Alloy 201 Polished Pipe
|
- Nickel 201 Thin Wall Pipe
- Welded Nickel Alloy 201 Pipe
- Seamless Nickel Alloy 201 Pipe
- Nickel 201 Welded Pipe
- Nickel Alloy 201 Round Pipe
- Nickel 201 Custom Pipe
- Nickel Alloy 201 Thick Wall Pipe
- Nickel Alloy 201 Thin Wall Pipe
- Polished Nickel 201 Pipe
- Nickel 201 Clad pipe
- Nickel 201 Welded pipe
- Nickel 201 lined pipe
|
Table of Content