Nickel Alloy Plate




Nickel Plate Stockist, Nickel Sheet, Nickel Alloy Polished Plate

Nickel Plate Suppliers

Nickel Plates made by nickel based alloys are very useful materials for the manufacture of high quality plates. Nickel Sheets is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile.. Nickel Plate has a low annealed rigidity and extremely low work – toughening rate.. Nickel Coils are chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.”Nickel Rolling Sheet has excellent corrosion resistance. We supply an extensive range of wide area Nickel Strips those are widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas. Nickel Plate specification governs a group of general requirements associated with plate, sheet, coil and strip.

Nickel Alloy Plate Specifications

Specification ASTM B162 UNS N02200, ASME SB162
Sizes 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
ASTM ASTM B168
AMS AMS 5553
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of Nickel Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Material JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc
DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc
Why choose Superior Steel Overseas
  • EN 10204/3.1B,
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
  • High special strength, high melt point
  • Excellent corrosive resistance,good thermal resistance
  • Customer support after-sales service
  • Huge Stock, Timely delivery
  • Strict Control from Raw Material to Finished Nickel Plate
  • Free Quote, Inquiry answered within 24 hours
profiling To provide a full profiling service we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Nickel Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;
  • Nickel Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;
  • Nickel Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.
  • Nickel Clad plate: Nickel Clad plate is a composite steel plate made by bonding Nickel plate, etc.
Superior Steel Overseas offer a comprehensive menu of services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing.

Chemical Composition Of Nickel Plates

Grade Ni+Co Cu Si Mn C Mg S P Fe
N4 99.99 0.015 0.03 0.002 0.01 0.01 0.001 0.001 0.04
N6 99.6 0.10 0.10 0.05 0.10 0.10 0.005 0.002 0.10
Ni201 99.0 ≤0.25 ≤0.35 ≤0.35 ≤0.02 / ≤0.01 / ≤0.40
Ni200 99.0 0.20 0.30 0.30 0.15 / 0.01 / 0.40

Nickel Plate, Sheet, Strip, Coil & Foil Capabilities

Grade Pure Nickel Strip 99.6%/99.9%
Thickness 0.02 to 2.50 mm
Tolerance +/- 5% (special tolerances is available)
Width Up to 350mm wide
Coil size Up to 80kg without welds
Temper Ranges Annealed to Full Hard

Nickel Plates, Sheets & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Nickel Plate Stocked Sizes

SIZE NICKEL ALLOY ALLOY ALLOY ALLOY ALLOY ALLOY ALLOY ALLOY ALLOY ALLOY ALLOY SIZE
200/1 400 600 601 625 718 800 825 AL6XN C276 20 A286
.125" X X X X X X X X X X X X 3.18mm
.134" X 3.40mm
.156" X X X X X X X 3.96mm
.187" X X X X X X X X X X X X 4.75mm
.250" X X X X X X X X X X X X 6.35mm
.312" X X X X X X 7.92mm
.375" X X X X X X X X 9.53mm
.500" X X X X X X X X X X X X 12.7mm
.625" X X X X X X X X X 15.9mm
.750" X X X X X X X X X 19.1mm
.875" X X X 22.2mm
1" X X X X X X X X X X X 25.4mm
1.125" X 28.6mm
1.250" X X X X X X X 31.8mm
1.500" X X X X X x X 38.1mm
1.750" X 44.5mm
2" X X X x 50.8mm
2.500" X X x 63.5mm
3" X 76.2mm

Nickel Plate Dimensions

Nickel Plate Metric Dimensions
Surface finish Thickness (mm) Width (mm)
2B – Cold rolled, heat treated, pickled, skin passed 0.25–8.0 max. 2032
2D – Cold rolled, heat treated, pickled 0.4–6.35 max. 1524
2E – Cold rolled, heat treated, mechanically descaled 0.4–8.0 max. 2032
2R – Cold rolled, bright annealed 0.25–3.5 max. 1524
2H – Work hardened 0.4–6.35 max. 1524
Polished, brushed 0.5–4.0 max. 1524
Top