Super Duplex 2507 Plate




Super Duplex UNS S32750 Plates Supplier, SAF 2507 Plate Exporter

Super Duplex 2507 Plate Supplier

Super Duplex 2507 Plate contains 25% chromium, 4% molybdenum, and 7% nickel. Super Duplex Steel 2507 Plates designed for applications which demand exceptional strength and corrosion resistance. Super Duplex SAF 2507 Plate high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.  Super Duplex UNS S32750 Plate usage should be limited to applications below 600° F (316° C). Super Duplex DIN 1.4410 Plates is highly resistant to uniform corrosion by organic acids such as formic and acetic acid. Duplex 2507 is highly resistant to carbide-related intergranular corrosion.  We have a huge inventory of UNS S32750 Super Duplex Steel Plates and UNS S32760 Plates in different sizes and dimensions as per customer requirement. Our offered Super Duplex Steel UNS S32750 Plate and Super Duplex Steel UNS S32760 Plate are widely used in a range of applications like structural, mechanical and general engineering purposes.We are having wide range of sizes in our stock of 2507 Super Duplex Stainless Steel Plate & 2507 Duplex Stainless Steel Sheet.

2507 Super Duplex Steel Plate Specifications

Sizes 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness 0.1mm to 100 mm Thk
Width 10-2500mm
Length 2m, 2.44m, 3m, or as required
ASTM ASTM B168
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Stock in form of Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
Material JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc
DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc
ASTM Standard ASTM A162, GB/T2054, DIN177502002, ASTM B127,ASTM B435, ASTM B582, ASTM B575, ASTM B168, ASTM B443, ASTM B463, ASTM B626, ASTM B536, etc
Why choose Superior Steel Overseas
  • EN 10204/3.1B,
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
  • High special strength, high melt point
  • Excellent corrosive resistance,good thermal resistance
  • Customer support after-sales service
  • Huge Stock, Timely delivery
  • Strict Control from Raw Material to Finished Inconel 600 Plate
  • Free Quote, Inquiry answered within 24 hours
Inconel 600 profiling To provide a full profiling service we use numerous profiling methods including:

  • Laser Plate Cutting
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting

Super Duplex 2507 Plate Chemical Composition

ELEMENT CONTENT (%)
Chromium, Cr 24 – 26
Nickel, Ni 6 – 8
Molybdenum, Mo 3 – 5
Manganese, Mn 1.20 max
Silicon, Si 0.80 max
Copper, Cu 0.50 max
Nitrogen, N 0.24 – 0.32
Phosphorous, P 0.035 max
Carbon, C 0.030 max
Sulfur, S 0.020 max
Iron, Fe Balance

Super Duplex 2507 Plate Mechanical Properties

0.2% Proof Stress (N/mm2  ) [ksi] minimum 550[79.8]
Ultimate Tensile Strength (N/mm2) [ksi] minimum 800 [116]
Elongation (%) minimum 25
ardness (HBN) 270 max
Reduction of Cross Section Area (%) 45
Charpy V-notch Impact at ambient Temp (J) [ft.lb] 80min [59min]
Charpy V-notch Impact at -46°C (J) [ft.lb] 45av, 35min [33av, 25.8min]

Super Duplex 2507 Plate Physical Properties

Properties Metric Imperial
Density 7.8 g/cm3 0.281 lb/in3
Melting point 1350°C 2460°F

Super Duplex 2507 Plate Equivalent grades

TRADE NAME COMMON NAME UNS ASTM A240/A240 (ASME) EUROPEAN
  Grade  Grade Plate  Werkstoff
Alloy 2507 2507 S32750 S32750 1.4410

Super Duplex UNS S32750 Plate Tolerances

Gauge LB/Sq. Ft. LB/Sq In. Gauge Tolerance
72″ Wide 96″ Wide
3/16 0.1875 8.579 0.05958 +.045″ -.010″ +.050″ -.010″
7/32 0.2187 9.870 0.06854
1/4 0.2500 11.162 0.07750
5/16 0.3125 13.746 0.09546
3/8 0.3750 16.496 0.11456 +.055″ -.010″ +.060″ -.010″
7/16 0.4375 19.080 0.13250
1/2 0.5000 21.633 0.15044
9/16 0.5625 24.247 0.16838
5/8 0.6250 26.831 0.18633
11/16 0.6875 29.415 0.20427
3/4 0.7500 32.123 0.22308 +.060″ -.010″ +.065″ -.010″
13/16 0.8125 34.707 0.24102
7/8 0.8750 37.291 0.25897
15/16 0.9375 39.875 0.27691
1 1.0000 42.665 0.29628 +.070″ -.010″ +.075 -.010″
1-1/8 1.1250 47.833 0.33217
1-1/4 1.2500 53.001 0.36806
1-3/8 1.3750 58.169 0.40395
1-1/2 1.5000 63.337 0.43984
1-3/4 1.7500 73.672 0.51161
2 2.0000 84.008 0.58339 +.125″ -.010″ +.150″ -.010″
2-1/8 2.1250 89.610 0.62229
2-1/4 2.2500 94.777 0.65817
2-1/2 2.5000 105.113 0.72995
2-3/4 2.7500 115.449 0.80173
3 3.0000 126.301 0.87709 +.150″ -.010″ +.160″ -.010″
3-1/2 3.5000 146.972 1.02064
4 4.0000 168.264 1.16850 +.180″ -.010″ +.200″ -.010

Super Duplex 2507 Plate Dimensions

Surface finish

Thickness (mm)

Width (mm)

2B – Cold rolled, heat treated, pickled, skin passed

0.25–8.0

max. 2032

2D – Cold rolled, heat treated, pickled

0.4–6.35

max. 1524

2E – Cold rolled, heat treated, mechanically descaled

0.4–8.0

max. 2032

2R – Cold rolled, bright annealed

0.25–3.5

max. 1524

2H – Work hardened

0.4–6.35

max. 1524

Polished, brushed

0.5–4.0

max. 1524

Top